6.2 KiB
tzbox
Donnerstag, 18. Dezember 2014
23:26
#Openvpn, Fritzbox, Config, Server,
192.168.132.2
HWSubRevision........ 3
ProductID............ Fritz_Box_7390
SerialNumber......... 0000000000000000
annex................ B
autoload............. yes
bootloaderVersion.... 1.947
bootserport.......... tty0
cpufrequency......... 500000000
firstfreeaddress..... 0x810C9834
firmware_version..... avm
firmware_info........ 84.06.20
flashsize............ 0x01000000
maca................. C0:25:06:97:BC:12
macb................. C0:25:06:97:BC:13
macwlan.............. C0:25:06:97:BC:14
macwlan2............. C0:25:06:97:BC:18
macdsl............... C0:25:06:97:BC:15
memsize.............. 0x08000000
modetty0............. 38400,n,8,1,hw
modetty1............. 38400,n,8,1,hw
modulemem............ 5683472
mtd1................. 0x9F020000,0x9FF00000
mtd2................. 0x9F000000,0x9F020000
mtd3................. 0x9FF00000,0x9FF80000
mtd4................. 0x9FF80000,0xA0000000
my_ipaddress......... 192.168.178.1
prompt............... Eva_AVM
req_fullrate_freq.... 166666666
sysfrequency......... 166666666
urlader-version...... 1947
usb_board_mac........ C0:25:06:97:BC:16
usb_rndis_mac........ C0:25:06:97:BC:17
usb_device_id........ 0x0000
usb_revision_id...... 0x0000
usb_manufacturer_name AVM
wlan_key............. 3164173153685692
Start.sh
# Skript startet den VPN Dienst.
# Wird von debug.cfg (aus dem Flash) aufgerufen
# Start des telnet Dienstes
echo telnetd wird gestartet
/usr/sbin/telnetd -l /sbin/ar7login
# wir warten und pruefen, bis Internetverbindung steht:
echo warten auf bestehende Internetverbindung
# hier wird jeweils so lange versucht,
# einen Ping erfolgreich an google
# zu schicken und bei Misserfolg gewartet
#while !(ping -c 1 www.google.de); do
#sleep 5
#done
# tun-Device anlegen, falls noch nicht vorhanden
echo das TUN Device wird erzeugt
mkdir /dev/net
mknod /dev/net/tun c 10 200
route add 84.200.10.214 gw 192.168.132.3
route del default dev lan
route add default dev tun0
# wir geben eine Info raus, dass der VPN Dienst gestartet wird:
echo OpenVPN wird gestartet
# Wir gehen in das Verzeichnis auf dem USB Device:
cd /var/mediapath/
# Aufruf des OpenVPN Binary mit dem Konfigurationsnamen, wird als daemon gestart
/var/mediapath/Dokumente/openvpn_2.3.2-mips-openssl-static --client --config client.conf --daemon
Client.conf
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 84.200.10.214 1194
;remote my-server-2 1194
route 10.8.0.0 255.255.255.0 10.8.0.2
;route 192.168.132.0 255.255.255.0 192.168.132.2
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nogroup
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ./ca.crt
cert ./fritzbox7390.crt
key ./fritzbox7390.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
tun-mtu 1500
tun-mtu-extra 32